Skip to content
VERITYCompliance & Risk Management
OwnersLendersInsurersContractorsHow it worksPricing
Try the live demoSign inCreate account

Sample data

Pass and fail, with the photo that matches.

These checks use real photographs from Wikimedia Commons. A green pass means the photo shows the condition in the note. A red fail means the photo shows the defect in the note. Nothing here is a code section or an approval.

PEX support

Pass

Checked. Looked at whether the tubing is held to the structure.

Why. The sample photo shows PEX tubing held to a joist with a metal strap.

Corrective action. None on this sample item.

Re-check. No re-check photo. A pass is not an approval.

Sample data. Verity does not decide this item. The authority having jurisdiction does.

GFCI device

Pass

Checked. Looked for a GFCI receptacle face with test and reset controls.

Why. The sample photo shows the Test and Reset buttons on a GFCI receptacle.

Corrective action. None on this sample item. The photo does not show how the device is wired.

Re-check. No re-check photo.

Sample data. Verity does not decide this item. The authority having jurisdiction does.

Sealed pipe penetration

Corrected

Checked. Looked at the opening where pipes pass through a wall or floor.

Why. The first sample photo shows pipes through an unsealed hole in a block wall.

Corrective action. Close and seal the opening. The follow-up photo is a different sample of pipes set in a firestop seal, not the same hole.

Re-check. Sample re-check photo shows a sealed penetration. The authority having jurisdiction decides if that seal is acceptable.

Before

After

Sample data. Verity does not decide this item. The authority having jurisdiction does.

Device wiring

Fail

Checked. Looked at whether conductors are inside a closed box.

Why. The sample photo shows a device with the cover off and conductors hanging out of the wall.

Corrective action. Put the conductors in a box and install the cover, then photograph the re-check. No corrected photo is in this sample.

Re-check. Still open in the sample. Not a final call.

Sample data. Verity does not decide this item. The authority having jurisdiction does.

Gap at a pipe sleeve

Fail

Checked. Looked at the joint where a pipe sleeve meets the board.

Why. The sample photo shows a dark gap around a steel sleeve. The source image labels that sleeve.

Corrective action. Fill the gap and photograph it. No corrected photo is in this sample.

Re-check. Still open in the sample.

Sample data. Verity does not decide this item. The authority having jurisdiction does.

View sample reportDownload sample PDFTry the live demo
VERITYCompliance & Risk Management

Verity documents work and does not certify code compliance. The authority having jurisdiction decides.

© 2026 Verity Compliance & Risk Management

OwnersLendersInsurersContractorsHow it worksPricingReadiness reviewsConsultant networkProductClauseExamplesDavid NickelsonAboutContactPrivacyTerms